Single Grained Metal Bond Wheel for Machining Aluminum Block
■Wheel of an alloy base where coarse abrasive grains are regularly placed with metal bond.
■Large protrusion of abrasive grains realizes smaller grinding resistance by 30-40% than that of the electroplated wheel of the same size and improves the grinding performance.
■Realizes machining with higher surface precision than cutting, and is effective for plane machining of mating surfaces of aluminum parts.
“DEX Duo” Electroplated Wheel for Hard Brittle Materials
“Gran DEX” Electroplated Wheel for Hard Brittle Material
■ Abrasive grain intervals are widened by controlling the abrasive grain density in the electroplating. This can reduce grinding resistance during rough grinding of hard, brittle materials such as glass or ceramics, and realize high-level cutting performance even in deep grinding.
■ Life of the wheel is extended significantly with tipping and surface roughness maintained at the same level as in conventional electroplated wheels.
■ Clogging can be reduced by widening the abrasive grain interval.
“Hi-PAX” PCD/PCBN cutting tools
These cutting tools are used for precision machining of mass production parts. The PCD (polycrystalline diamond) tool is used for machining ceramics, plastics, and non-ferrous metals while the PCBN (polycrystalline CBN) tool is used for high-hardness alloy tool metals and difficult-to-cut nickel alloys. These tools possess finer cutting
surfaces than other carbide tools and can last up to ten times longer.
“Hi-PAX” PCD end mills/reamers
These tools are widely used for the precision machining of plastics, aluminum alloys, carbon materials, and ceramics. They can also be used as wood router bits. The tools produce fine finished surfaces that carbide tools cannot match, offer high abrasion resistance, and can last up to ten times longer than carbide tools.
“Hi-PAX” PCD/PCBN inserts
These inserts can be attached to cutting tools much like carbide inserts. However, compared to carbide inserts, these inserts produce finer finished surfaces and can last up to ten times longer. They can also be made in various shapes and the most appropriate chip material for target work materials can be available.