Product List

  • Diamond wheel for chamfering glass substrates
    Diamond wheel for chamfering glass substrates 画像

    This chamfering wheel is designed to maintain substrate strength when fabricating glass display panels and cover glasses. Wheels for facilitating high-speed substrate feeding are available for various machines.

  • “DEX” diamond wheels for chamfering glass disks
    “DEX” diamond wheels for chamfering glass disks 画像

    These wheels are used to chamfer the inner diameter (ID) or outer diameter (OD) edge of glass disks. Due to the special electroplating used in this design, the roughness of chamfered surfaces are improved and chipping at the boundary area to the edge surface is minimized. Wheels using micron size abrasive grain are available.

  • “Arcceed” diamond cutting tool
    “Arcceed” diamond cutting tool 画像

    This is a single-crystal diamond radius cutting tool with a cutting edge waviness of 50 nm or less. It realizes high-precision machining, thus reducing mold production processing requirements. Due to its fine rake and clearance surface, it can elicit better performance of a 3-axis machining device and improve the copying performance of molds. It also realizes high-precision machining by a 2-axis machining device.

  • “Arcceed” diamond end mill
    “Arcceed” diamond end mill 画像

    This high quality single-crystal diamond ball end mill can be used at speeds up to 100,000 revolutions per minute (RPM). It has a fine cutting edge and a low axis deviation. W.A.90 products will be available.

  • Diamond forming cutting tool
    Diamond forming cutting tool 画像

    This is a single-crystal diamond forming cutting tool manufactured using our forming and polishing technology. It realizes forming mirror machining for high-precision production of complex shapes consisting of plastics or soft metals.

  • “Hi-PAX” PCD/PCBN cutting tools
    “Hi-PAX” PCD/PCBN cutting tools 画像

    These cutting tools are used for precision machining of mass production parts. The PCD (polycrystalline diamond) tool is used for machining ceramics, plastics, and non-ferrous metals while the PCBN (polycrystalline CBN) tool is used for high-hardness alloy tool metals and difficult-to-cut nickel alloys. These tools possess finer cutting
    surfaces than other carbide tools and can last up to ten times longer.

  • “Hi-PAX” PCD end mills/reamers
    “Hi-PAX” PCD end mills/reamers 画像

    These tools are widely used for the precision machining of plastics, aluminum alloys, carbon materials, and ceramics. They can also be used as wood router bits. The tools produce fine finished surfaces that carbide tools cannot match, offer high abrasion resistance, and can last up to ten times longer than carbide tools.

  • Diamond polishing products
    Diamond polishing products 画像

    These products are used for lapping and polishing high-hardness materials such as glass, ceramics, ferrites, sapphires, and carbide alloys when high-precision surface finishing is required. Highly precise diamond powder is used for slurry or spray products.

  • Diamond paste
    Diamond paste 画像

    These diamond products are used to shorten polishing times and achieve high-precision polishing of high-hardness materials such as metal molds. Uniformly dispersed diamond powder distributed in gel materials are diluted for use with specific solutions.

  • 1