Product List

  • Large Size Resin Bond Wheel
    Large Size Resin Bond Wheel 画像

    ■ Single-piece formation of a resin bond wheel with a maximum outer diameter of φ600mm and width of T100mm can be realized.
    ■ Grinding trace at joint is eliminated.
    ■ Dynamic balance of 0.1μm is realized for products with a dedicated flange.

  • “DEX” diamond wheel for high-efficiency milling of difficult-to-cut materials
    “DEX” diamond wheel for high-efficiency milling of difficult-to-cut materials 画像

    This wheel enables deep milling of difficult-to-cut composite fiber materials such as brake linings, architectural ceramic materials, secondary products of cement, carbon, FRP, and thermoset resins. The amount of ground material removed per unit time is relatively large, which realizes highly efficient grinding. By controlling the contact area between the material being ground and the wheel, this design reduces grinding noise, suppresses additional electric current in the main spindle, and contributes to energy saving.

  • Diamond cutting wheels
    Diamond cutting wheels 画像

    These wheels are used for cutting and grooving carbide alloys, cermet, ceramics, glass, ferrites, semiconductors, carbon, and other non-iron metal materials. They realize less bending and a higher quality cutting surface. A resin bond CBN wheel is provided for cutting magnetic materials.

  • “Hi-PAX” PCD chip saws
    “Hi-PAX” PCD chip saws 画像

    These chip saws are edged with PCD (polycrystalline diamond) and can produce finer surfaces than carbide tools while lasting ten times as long. They are effective for cutting and grooving of architecture materials, wood, aluminum alloys, glass fiber composite materials, rubbers, and plastics.

  • Diamond dry bits
    Diamond dry bits 画像

    These diamond dry drill bits are suitable for drilling work in situations where coolant (cooling water) cannot be used. They are used frequently for reforming existing buildings. Mole bits are also available for drilling reinforced concrete.

  • 1